|

SANCAP provides a full range of heat seal,
pressure sensitive and gasket sealing product, including paper, foil and foam. SANCAP products are compatible with glass, PVC, PE, PET, polystyrene and polypropylene packaging.
Here are our most popular products, click for product information:
Induction Seals, Vented
Heat Seals, Pressure
Sensitive Innerseals, Synthetic Foams,
Traditional Liners.
|
Induction Seals |
Description |
Suggested Application |
|
HS035 HEAT SEAL
(see data sheet) |
Paper-backed aluminum foil coated with a clear heat sealable
coating. It can be permanent laminated to polystyrene foam or wax bonded to a pulp backing. A strong universal seal with the following features: low melt point, wide seal range, tamper-indicating,
multiple backings available, single liner for multiple uses. |
Dry products, fruit juices, milk, glass cleaner, peroxide, and
spices. It will seal to most containers. Not recommended for products containing oil. |
|
HS053 HEAT SEAL |
Paper-backed aluminum foil coated with a clear heat sealable
coating. It can be permanent laminated to polystyrene foam or wax bonded to a pulp backing. |
Dry products, fruit juices, milk, glass cleaner, peroxide, and
spices. It will seal to most containers. Not recommended for products containing oil. |
|
HS057 HEAT SEAL |
Aluminum foil polyester combination coated with clear polyethylene.
It is wax bonded to a pulp backing. |
Dry products, motor oil, cooking oils, shampoo, fruit juices, anti-freeze,
vinegar, brake fluid, over-the- counter drug products on polyethylene bottles. |
|
HS402 HEAT SEAL |
Heat sealable aluminum foil surlyn combination pre-bonded to pulp board,
permanent bonded to other suitable backings. |
Salad dressings, dry products, oils, and peanut butter. It provides
a peelable seal on most commonly used containers. |
|
HS805 HEAT SEAL |
Aluminum foil coated with co-extruded surlyn and polymeric coating. |
Dry products, fruit juices, milk, glass cleaners, peroxide and
spices. Peelable seal on commonly used containers including polypropylene bottles. |
|
HS906 HEAT SEAL
(see data sheet) |
Sealable polyester bonded to a suitable backing. |
Dry products, vegetable oil, peanut butter, over-the- counter drugs.
Clean peel for PVC and PET containers. |
|
PT 204 |
Heat sealable aluminum foil bonded to polyolefin tear resistance backing. |
Clean peel product used on salad dressing, dry products, cooking oil and
peanut oil. Provides peelable seal on commonly used containers. |
|
PT 508 |
Heat seal aluminum foil and co-extruded heat seal coating laminated to
polyethylene foam followed by polypropylene film for peel tab application. |
Dry products, milk, fruit juice, glass cleaner, peroxide and spices.
Peelable seal for commonly used containers including polypropylene bottles. |
|
|
back to top |
|
|
Vented Liner |
Description |
All About Venting |
|
HS02 Vent / 20 Foam |
A universal heat seal with a low melt point. |
The venting process is in the construction of the liner. The paper
down construction allows transmission of oxygen through the paper with some barrier benefits. The exact amount of transmission varies due to actual product packaged, container size and torque application of
the closure. Testing should be completed to determine proper use and benefits achieved in each application. |
|
HS503 Vent / 20 Foam |
A one-piece liner. |
|
HS503 Vent / 25 White Line Pulp |
A two-piece liner. |
|
|
back to top |
|
|
Pressure Sensitive |
Description |
Suggested Application |
|
PRESSURE SEAL |
Polystyrene foam (.020 - .040) with a pressure sensitive coating. |
Dry products, candy, spices and syrup. Not recommended for products
containing oil. |
|
PS 304 |
Vinyl coated aluminum foil with pressure sensitive coating for better
barrier. |
Dry products, candy, spices and syrup. Not recommended for products
containing oil. |
|
|
back to top |
|
|
Synthetic Foams |
Description |
Suggested Application |
|
POLYLINE |
White low dense polyethylene laminated on both sides of polystyrene foam. |
An alternative of polyethylene foam. Good moisture and chemical
resistance. It can be used for aqueous, alcoholic, oily, acidic and alkaline products. |
|
SARALENE |
Saran film laminated to the polystyrene foam and polyethylene laminated on
other side of the foam. |
After-shave lotion, coffee concentrate, cough syrup, skin cream, hand
lotion, mayonnaise, and alcohol. |
|
PROPLINE |
Polystyrene foam laminated polypropylene on both sides. |
An alternative for polypropylene foam. A complete plastic liner for
pulp board replacement. Can be used for aqueous, alcoholic, oily, acidic and alkaline products. |
|
|
back to top |
|
|
Traditional Liners |
Description |
Suggested Application |
|
VINYLINER |
White pigmented vinyl chloride-acetate copolymer coating on a suitably
primed bleached Kraft paper. |
Skin care products, carbonated beverages, mild spice extracts, alcoholic
beverages, personal care products, over-the-counter medications, mild cleaners and polishes. |
|
SICOCOTE 265 & 255 |
Polyvinylidene chloride (PVDC) and clear or white polyethylene on natural
or white Kraft paper and bonded to a pulp backing. |
Cosmetics, cooking oils, mild household cleaners, spices, personal hygiene
products, soap products and condiments. |
|
SICOCOTE 260 & 250 |
Clear or white polyethylene and polyvinylidene chloride (PVDC) on a
natural or bleach Kraft paper and bonded to a pulp backing. |
Same as 265 / 255 plus stronger acids and stronger alkalies. |
|
COSMETIC LINER |
Polyester film laminated to aluminum foil with white polyethylene bonded
to a pulp backing. |
Most solvents, cosmetics, household cleaners, mild acids, alkalies and
oils. |
|
SICOFOIL |
White paper-backed aluminum foil coated with a white pigmented solution of
vinyl chloride-acetate copolymer. |
After-shave lotion, astringents, baby cream, deodorant stick, hair
cream, shampoo, mineral oil, waxing compounds. |
|
|
back to top |
|
|
|
|
SANCAP Liner Technology, Inc.
16125 Armour Street, N.E.
Alliance, Ohio 44601 USA
|
Phone: |
330-821-1166 |
|
Fax: |
330-821-0364 |
|
Toll-Free: |
800-966-7262 |
|