Here are our most popular products, click for product information:
|
Description |
|
|
Suggested Application |
|
|
Paper-backed
aluminum foil coated with a clear heat sealable
coating. It can be permanent laminated to polystyrene foam or wax
bonded to a pulp backing. A strong universal seal with the following
features: low melt point, wide seal range, tamper-indicating,
multiple backings available, single liner for multiple uses. |
|
|
Dry products, fruit juices, milk, glass cleaner, peroxide, and spices. It will seal to most containers. Not recommended for products containing oil. | |
| A one piece universal heat seal. It is a heat seal and film on aluminum foil with a backing and PET. HS035 LITE / PET has a tamper indicating peel-able seal. | |
|
Dry products, fruit juices, milk, glass cleaner, peroxide and spices. Not recommended for products containing oil.
|
|
| HS056 HEAT SEAL | Aluminum foil polyester combination coated with clear polyethylene.
It is wax bonded to a pulp backing and permanently laminated to pulp. |
|
|
Dry products, motor oil, cooking oils, shampoo, fruit juices, anti-freeze, vinegar, brake fluid, over-the- counter drug products on polyethylene bottles. |
| HS402P_HEAT_SEAL |
Heat sealable aluminum foil surlyn combination pre-bonded to pulp board,
permanent bonded to other suitable backings. |
|
|
Salad dressings, dry products, oils, and peanut butter. It provides a peelable seal on most commonly used containers. |
| HS805 HEAT SEAL |
Aluminum foil coated with co-extruded surlyn and polymeric coating. | |
|
Dry products, fruit juices, milk, glass cleaners, peroxide and
spices. Peelable seal on commonly used containers including polypropylene bottles. |
| HS906 HEAT SEAL |
Sealable polyester bonded to a suitable backing. |
|
|
Dry products, vegetable oil, peanut butter, over-the- counter drugs. Clean peel for PVC and PET containers. |
|
Description |
|
|
All About Venting |
|
| A universal heat seal with a low melt point. Offered in one piece foam or two piece wax bonded to pulp. | |
|
The
venting process is in the construction of the liner. The paper
down construction allows transmission of oxygen through the paper
with some barrier benefits. The exact amount of transmission varies due
to actual product packaged, container size and torque application of
the closure. Testing should be completed to determine proper use
and benefits achieved in each application. |
|
|
A one piece venting liner with foam backing. |
||||
| Polyscrim Venting | A low density extrusion coated film on one side of white reinforced Kraft paper. | |
|
Unique venting for swimming pool products, bleaches and hydrogen peroxide(10%). Testing should be completed to determine proper use and benefit achieved in each application |
|
Description |
|
|
Suggested Application |
|
|
Polystyrene foam (.020 - .040) with a pressure sensitive coating |
|
|
Dry products, candy, spices and syrup. Not recommended for products
containing oil. |
|
|
Polyester coated aluminum foil with pressure sensitive coating for better
barrier. |
|
|
Dry products, candy, spices and syrup. Not recommended for products containing oil. | |
|
Description |
|
|
Suggested Application |
|
| White low dense polyethylene laminated on both sides of polystyrene foam. | |
|
An alternative of polyethylene foam. Good moisture and chemical
resistance. It can be used for aqueous, alcoholic, oily, acidic and alkaline products. |
|
| Polystyrene foam laminated polypropylene on both sides. | |
|
An alternative for polypropylene foam. A complete plastic liner for
pulp board replacement. Can be used for aqueous, alcoholic, oily, acidic and alkaline products. |
|
| POLYSTYRENE FOAM |
|
|
|
Cost effective sealing material for milk, honey, syrups, and liquid detergent. Not recommended for products containing oil. |
| Traditional Gasket Liners |
Description |
|
|
Suggested Application |
|
Polyvinylidene chloride (PVDC) and clear or white polyethylene on natural
or white Kraft paper and bonded to a pulp backing. |
|
|
Cosmetics, cooking oils, mild household cleaners, spices, personal hygiene products, soap products and condiments. | |
|
Clear or white polyethylene and polyvinylidene chloride (PVDC) on a
natural or bleach Kraft paper and bonded to a pulp backing. |
|
|
Same as 265 / 255 plus stronger acids and stronger alkalies. | |
|
|
|
|
Most solvents, cosmetics, household cleaners, mild acids, alkalies and oils. | |
| SILITE /PET |
Polyester film laminated to yellow Kraft paper with facing paper or bonded to pulp board.
|
|
|
Alcohol (50%), creamer, ether, floor cleaner, lard, mineral oil, vegetable oil |
| ALUMINUM FOIL |
Aluminum foil supplied on bleached Kraft paper backing or in direct lamination to pulp. |
|
|
Chrome cleaner & Polish, Creosote, Oil, and Mineral Oil. |
For nearly 70 years, SANCAP has grown with the closure industry. As the requirements of packaging regulations and end-product manufacturers have become more demanding, SANCAP has developed innovative solutions to meet FDA requirements.
Today, SANCAP protects a wide aray of food, pharmaceutical, chemical, and cosmetic products. We also have the experience and creativity to meet the sealing liners challenges of tomorrow, as well.
What sets SANCAP apart from the others?
> SANCAP is customer-focused. We
proudly serve both large and small closure
manufacturers and end-users. Our
low minimum orders, responsive
delivery and technical support enable us
to meet your special needs.
> SANCAP is an integrated
manufacturer. We extrude, compound, coat,
laminate, print, and convert lining
materials to ensure total closure
integrity.
> SANCAP provides a full range of heat
seal, pressure sensitive and gasket
sealing product, including paper, foil
and foam. SANCAP products are
compatible with glass, PVC, PE, PET,
polystyrene and polypropylene
packaging.
> SANCAP is state-of-the-art. Because
we employ lean manufacturing
processes, you are assured quality and
efficiency at a cost-competitive
price.
SANCAP Liner Technology serves closure manufacturers directly and seeks to establish integrated relationships with both closure manufacturers and end-users; believing that such a seamless approach to product development, marketing, and manufacturing serves all interests most effectively.